Ver categorias
Explorar
Fiverr Pro
Português
$
USD
Eu projetarei pcb para módulo de computação raspberry pi cm4 cm5, placa portadora, placa io cm5
Projetista de PCB Engenheiro de Sistemas Embarcados
Engenheiro de projeto de hardware, proficiente em esquemas e projeto de PCB, projetos de PCB relacionados a Raspberry Pi e SoC, desenvolvimento de Linux embarcado e programação de firmware de microcon...
Verificado pelo Fiverr Pro
Hotte foi selecionado pela equipe do Fiverr Pro considerando sua experiência.
Verificado para
Engenharia Eletrônica
O que as pessoas adoram neste freelancer
sk_rebricker
Alemanha
Hotte designed a custom dual Raspberry Pi CM5 carrier board for us — DIN-rail mountable, with an STM32H7 microcontroller, managed Ethernet switch, motor and...
hyllis_o
Estônia
Hotte created a complex board mixing multiple domains, even though the dimensions and shape that I gave him for the board was rather small, and the position...
medpeek
Espanha
Hotte delivered the project with considerable speed, understanding and improving the requirements I asked before and during the project development. The communication...
jespernissen
Dinamarca
I have a little knowledge of PCB’s and Hotte made a PCB for me. Integrated CM5 with multiple USB ports, 4G modem and integrated AC to DC conversion. Super fast...
Sobre este Serviço
Vetted Pro
- Projetar e desenvolver placas personalizadas profissionais utilizando o Raspberry Pi Compute Module 4 (CM4), Compute Module 5 (CM5) ou seus módulos alternativos como Banana Pi CM4, Orange Pi CM4/CM5.
- Projetar placa de base personalizada para Nvidia Jetson Nano, Jetson Xavier NX, AGX.
- Projete placa base personalizada para SoM NXP iMX8, SoM baseado em Rockchip SoC
Ela é frequentemente chamada de placa Raspberry Pi CM5 IO, placa portadora CM5 ou placa base CM5.
Eu projetei PCBs personalizados para Raspberry Pi CM4, Raspberry Pi CM5, Orange Pi CM5, Banana Pi CM5, Radxa CM5, ComputeLab iMX8, Toradex iMX7, Toradex iMX8, Nvidia Jetson Nano, Jetson Xavier NX e muitos outros.
Antes de comprar meu Serviço, entre em contato comigo para verificar minha disponibilidade e mais detalhes do projeto.
Você pode conferir mais mostras de design no meu site pessoal:
https://raspipcb.com
Meu portfólio
Outros serviços de Engenharia Eletrônica que eu ofereço
Avaliações
79 avaliações deste Serviço
| (76) | ||
| (3) | ||
| (0) | ||
| (0) | ||
| (0) |
Classificação detalhada
- Nível de comunicação do freelancer
- Qualidade da entrega
- Valor da entrega
Ordenar por
Mais relevante
S sk_rebricker
Alemanha
Hotte designed a custom dual Raspberry Pi CM5 carrier board for us — DIN-rail mountable, with an STM32H7 microcontroller, managed Ethernet switch, motor and lighting control, and dual CSI camera interfaces (FPC + HDMI). This was not a simple board, and his work was excellent from start to finish. Professionalism:...
US$ 2.000-US$ 3.000
$
3 semanas
Tempo
Útil?H hyllis_o
Cliente recorrente
Estônia
Hotte created a complex board mixing multiple domains, even though the dimensions and shape that I gave him for the board was rather small, and the position of multiple connectors external and internal were fixed, and not necessarily in the most ideal position for the layout. I haven't tested the assembled...
US$ 1.500-US$ 2.000
$
11 dias
Tempo
T 
Resposta do freelancer
Útil?M medpeek
Espanha
Hotte delivered the project with considerable speed, understanding and improving the requirements I asked before and during the project development. The communication was fluid during the whole project. He delivered all the needed files and guided me through the ordering process. 10/10!
US$ 2.000-US$ 3.000
$
2 dias
Tempo
Útil?M mharraway
Holanda
Was very helpful and was able to answer all questions. Was very willing to change design and do revisions. Response time could have been better, but overall delivered exactly what was needed.
US$ 1.500-US$ 2.000
$
10 dias
Tempo
Útil?J jespernissen
Dinamarca
I have a little knowledge of PCB’s and Hotte made a PCB for me. Integrated CM5 with multiple USB ports, 4G modem and integrated AC to DC conversion. Super fast delivery and he even guided me how to make some changes myself in EasyEDA. Overall very happy with the work and the service and i will definitely ask Hotte next time i need a PCB
US$ 800-US$ 1.000
$
3 dias
Tempo
Útil?
Avaliações
79 avaliações deste Serviço
| (76) | ||
| (3) | ||
| (0) | ||
| (0) | ||
| (0) |
Classificação detalhada
- Nível de comunicação do freelancer
- Qualidade da entrega
- Valor da entrega
Ordenar por
Mais relevante
S sk_rebricker
Alemanha
Hotte designed a custom dual Raspberry Pi CM5 carrier board for us — DIN-rail mountable, with an STM32H7 microcontroller, managed Ethernet switch, motor and lighting control, and dual CSI camera interfaces (FPC + HDMI). This was not a simple board, and his work was excellent from start to finish. Professionalism:...
US$ 2.000-US$ 3.000
$
3 semanas
Tempo
Útil?H hyllis_o
Cliente recorrente
Estônia
Hotte created a complex board mixing multiple domains, even though the dimensions and shape that I gave him for the board was rather small, and the position of multiple connectors external and internal were fixed, and not necessarily in the most ideal position for the layout. I haven't tested the assembled...
US$ 1.500-US$ 2.000
$
11 dias
Tempo
T Resposta do freelancer
Útil?M medpeek
Espanha
Hotte delivered the project with considerable speed, understanding and improving the requirements I asked before and during the project development. The communication was fluid during the whole project. He delivered all the needed files and guided me through the ordering process. 10/10!
US$ 2.000-US$ 3.000
$
2 dias
Tempo
Útil?M mharraway
Holanda
Was very helpful and was able to answer all questions. Was very willing to change design and do revisions. Response time could have been better, but overall delivered exactly what was needed.
US$ 1.500-US$ 2.000
$
10 dias
Tempo
Útil?J jespernissen
Dinamarca
I have a little knowledge of PCB’s and Hotte made a PCB for me. Integrated CM5 with multiple USB ports, 4G modem and integrated AC to DC conversion. Super fast delivery and he even guided me how to make some changes myself in EasyEDA. Overall very happy with the work and the service and i will definitely ask Hotte next time i need a PCB
US$ 800-US$ 1.000
$
3 dias
Tempo
Útil?
