I will design custom pcb layout, schematic, circuit pcb, esp32, stm32, hardware design
PCB Design Engineer, IoT and Embedded Boards
Sobre este Serviço
Do you need pcb design for an ESP32 product that works on the first spin?
I design ESP32 boards for IoT devices. You send a block diagram, a breadboard photo or a parts list. You get a checked board ready to order, built around the sensors, power source and antenna you choose.
What I do:
- ESP32, ESP32-S3 and ESP32-C3 schematic design
- Power stage: USB-C input, LDO or buck, battery charging
- Auto-reset and boot circuit for easy flashing
- 2-layer and 4-layer pcb layout with antenna keep-out zones
- Test pads, programming header and status LEDs
- Design rule check and electrical rule check
- Gerber, drill, BOM and pick-and-place export
Tools: KiCad, Altium Designer, EasyEDA
You receive: native project files, schematic PDF, Gerber and drill files, BOM, pick-and-place file, 3D STEP model.
Why it works:
- I keep copper, traces and parts away from the antenna, a common cause of weak Wi-Fi range
- Every part is checked for stock and footprint before layout
- Revisions cover changes inside the agreed design; a new concept or board size is quoted as a custom offer.
Message me your parts list or sketch and your target board size, and I will send a clear plan.
Outros serviços de Engenharia Eletrônica que eu ofereço
Perguntas frequentes
What do you need from me to start?
A block diagram, parts list or sketch, plus board size, power source (USB, battery or a mains module) and the sensors or ports you need. If you have none, send a short description and I will propose a parts list for your approval.
Can you work from a sketch or photo?
Yes. Send a clear photo of the breadboard or a hand sketch with pin labels. I draw the schematic from it, list the parts and confirm anything unclear with you before layout begins.
Will my board house accept your files?
Yes. I export standard Gerber and drill files with a layer map and a stackup note, and I match the capability sheet of your board house. JLCPCB, PCBWay and others publish theirs. Tell me which one you plan to use.
How do you protect Wi-Fi range on the board?
I keep the antenna area free of copper, traces and parts as the module datasheet states, and place the module at a board edge. Plastic or metal enclosures change range, so send enclosure details if you have them.
Can you add battery charging and a fuel gauge?
Yes, with a standard Li-ion charger and an optional fuel gauge. Tell me the cell capacity and the run time you expect. I choose parts that stay in stock and list alternates in the BOM.
Do you provide a pin map for my firmware?
Yes. I deliver a pin map sheet listing each ESP32 pin, its net name and its function, so your firmware matches the board. I do not write or debug firmware.
Do you build, print or ship boards?
No. I deliver design files only. You send them to a board house or assembly service of your choice. I can explain the ordering steps. I do not make, assemble, test or ship physical boards.
How do revisions work?
Included revisions: 2 on Basic, 3 on Standard, 5 on Premium. They cover changes inside the agreed design. A new concept or a changed board size or brief is quoted as a custom offer, so your first price stays fair.
What changes the price?
Layer count, part count, board size limits, antenna and power complexity, and how finished your schematic is. A tight outline or a dense layout takes more time. Send your details and I quote before you order.
Do I own the files and can I sell what I make?
Yes. On completion you own the delivered design files and can build and sell products from them. You must own any logo or artwork you supply. I do not reuse your design for other clients.
2 avaliações deste Serviço
| (2) | ||
| (0) | ||
| (0) | ||
| (0) | ||
| (0) |
Classificação detalhada
- Nível de comunicação do freelancer
- Qualidade da entrega
- Valor da entrega
Ordenar por
B 
brandyloren

Reino Unido
Colaboração contínuagreat and nice working with
US$ 50
$
2 dias
Tempo
Útil?B 
brandyloren

Reino Unido
Colaboração contínuagreat and nice working with
US$ 50
$
2 dias
Tempo
Útil?
2 avaliações deste Serviço
| (2) | ||
| (0) | ||
| (0) | ||
| (0) | ||
| (0) |
Classificação detalhada
- Nível de comunicação do freelancer
- Qualidade da entrega
- Valor da entrega
Ordenar por
B 
brandyloren

Reino Unido
Colaboração contínuagreat and nice working with
US$ 50
$
2 dias
Tempo
Útil?B 
brandyloren

Reino Unido
Colaboração contínuagreat and nice working with
US$ 50
$
2 dias
Tempo
Útil?

