Ver categorias
Explorar
Fiverr Pro
Português
$
USD
Parece que este serviço está em espera
I will do pcb board, embedded system, raspberry pi, cm4,cm5, jetson, stm32, esp32, fpga
Reino Unido
Eu falo Inglês
pcb designer
I'm a Professional PCB Designer with experience in schematic design and high-quality PCB layout. I design manufacturing-ready PCBs with a focus on reliability, signal integrity, and cost efficiency. S...
Sobre este Serviço
Get PCB Design & Embedded Systems for Raspberry Pi CM4/CM5, Jetson, STM32, ESP32, FPGA
I am an Embedded Hardware & Firmware Engineer with 5+ years of commercial experience in custom carrier boards, compute module IO boards and full embedded system development from schematic to firmware bring-up using Altium Designer, Cadence OrCAD, KiCad & more
What I Can Do for You
- PCB Design Up to 8 Layers
- Raspberry Pi CM4 / CM5 carrier board (IO board / base board)
- Alternative CM modules: Orange Pi CM4/CM5, Banana Pi CM5, Radxa CM5
- NVIDIA Jetson Nano, Xavier NX, AGX
- NXP i.MX8 / i.MX7 SoM
- Rockchip, ZYNQ FPGA, BeagleBone
- Arduino, STM32, ESP32, PIC, NRF52, NRF91
High-Speed & Advanced Interfaces
- DDR, eMMC, Flash memory
- USB 2.0 / 3.0
- HDMI, Display
- Ethernet, PoE
- PCIe
- MIPI CSI / DSI (Camera & Display)
- Touch screen interfaces
- Power management & PMIC design
Firmware, Drivers & OS
- STM32, ESP32 (ESP-IDF), NRF52 (BLE)
- Yocto Linux & Buildroot
- Bare-metal & RTOS
- Device drivers & board bring-up
- C / C++ / Python
Boards Ive Designed Before
- Raspberry Pi CM4 & CM5
- Orange Pi CM5, Banana Pi CM5, Radxa CM5
- Nvidia Jetson Nano & Xavier NX
- Toradex iMX7 / iMX8
- ComputeLab iMX8
- STM32, ESP32, NRF52, PIC custom boards
Perguntas frequentes
Do you design Raspberry Pi CM4 and CM5 carrier boards?
Yes. I design Raspberry Pi CM4 and CM5 carrier boards, also known as CM5 IO boards, CM5 base boards, and CM4/CM5 custom boards, including high-speed interfaces, power management, and production-ready layouts.
can you design boards for Jetson, iMX8, Rockchip, or FPGA?
Yes. I design custom carrier boards and base boards for NVIDIA Jetson Nano, Xavier NX, AGX, NXP iMX8/iMX7, Rockchip SoCs, and ZYNQ FPGA platforms.
Do you support alternative compute modules like Orange Pi or Banana Pi CM5?
Absolutely. I work with Orange Pi CM4/CM5, Banana Pi CM5, Radxa CM5, and other CM-compatible modules.
What PCB design tools do you use?
I use Altium Designer, Cadence OrCAD, KiCad, and EasyEDA depending on project requirements. I design up to 8-layer PCBs with proper signal integrity.
Do you handle high-speed interfaces?
Yes. I design boards with DDR, eMMC, Flash, USB, HDMI, Ethernet, PCIe, MIPI CSI/DSI, camera interfaces, touch screens, and PoE.
Can you also develop firmware and software?
Yes. I provide firmware, driver, and OS development, including: STM32, ESP32 (ESP-IDF), NRF52 BLE, NRF91, PIC Yocto Linux, Buildroot Board bring-up and device drivers
What communication protocols do you support?
UART, I2C, SPI, CAN, RS485, MODBUS, MQTT, BLE, LoRaWAN, Ethernet.
Do you provide AI or IoT solutions?
Yes. I support AI/ML deployment on edge devices, IoT system design, and hardware validation for production.
Will the design be production-ready?
Yes. All designs follow industry best practices, including DFM/DFA considerations, clean schematics, and complete documentation.
Should I contact you before ordering?
Yes. Please contact me before placing an order to discuss requirements, timeline, and the best package for your project.
