m
m_abdulrehmann

Abdul Rehman

@m_abdulrehmann
5,0(3)

PCB Design Engineer PCB Layout, Circuit Simulation, Embedded Firmware Expert

Paquistão
Inglês, Urdu, Hindi
Algumas informações são exibidas no idioma inglês.
Sobre mim
I'm a Junior Design Engineer at Cirhex (Pvt.) Limited, building real-world experience in PCB design and embedded firmware development. New to Fiverr, so I'm keeping rates low while I build reviews here. My work spans single- and multi-layer PCB layouts in Flux AI, Altium, KiCad, EasyEDA, circuit testing and validation, and firmware for ESP32, ESP8266, and Nordic nRF microcontrollers using Arduino IDE and Visual Studio. I care about clean schematics, reliable boards, and firmware that works the first time. If you need a dependable engineer, let's talk.... Saiba mais

Habilidades

m
m_abdulrehmann
Abdul Rehman
offline • 
Tempo médio de resposta: 1 hora

Conheça meus serviços

Circuito Impresso (PCB)
I will design professional pcb and schematics in flux ai
5,0(3)
Circuito Impresso (PCB)
I will design professional pcbs and schematics in altium designer

Portfólio

Experiência profissional

Cirhex

Junior Design Engineer

Cirhex • Período integral

Jun 2025 - Present • 1 yr 3 mos

I worked as a Junior Design Engineer (and previously Electronics Engineering Intern) at Cirhex Pvt Ltd, a PCB and embedded product design house in Islamabad. Over the course of this role, I have been directly involved in taking hardware products from initial concept through to working, client-ready prototypes. My core responsibilities include designing electronic schematics and PCB layouts for both client and in-house projects, working across five industry-standard EDA platforms - Altium Designer, KiCad, EasyEDA, Eagle Autodesk, and Flux.AI - selecting the right tool based on each project's specific requirements. This covers everything from single-layer boards to complex multilayer designs, including component placement, routing, power and ground plane design, layer stack-up planning, and DRC/DFM checks to ensure designs are manufacture-ready. Beyond schematic and layout work, I carry out hardware bring-up, testing, and debugging on assembled boards, and integrate hardware with firmware for embedded and IoT-based products. I regularly work with ESP32, ESP8266, and Nordic nRF-based microcontrollers, developing and testing firmware using Arduino IDE and Visual Studio. Some of the key projects I've contributed to at Cirhex include a wearable Bluetooth input device (a smart ring built around an nRF module and ESP32 dongle) and a compact, USB-C powered portable audio recording device designed for long-duration, low-file-size recordings such as doctor-patient consultations. I also designed and delivered several standalone PCB projects, including a Nodeboard, DivertorBoard, and Gas-SensorBoard, along with multiple single- and multilayer PCB designs across the different EDA platforms mentioned above. Throughout these projects, I collaborate closely with cross-functional teams - including firmware, hardware, and product teams - to move designs efficiently from concept to a functioning, tested prototype ready for client delivery.

3 Avaliações
5,0

(3)
(0)
(0)
(0)
(0)
Classificação detalhada
  • Nível de comunicação do freelancer
    5
  • Qualidade da entrega
    5
  • Valor da entrega
    5
1-3 fora das 3 avaliações
Ordenar por
Mais relevante
    A

    armando_sep

    MX

    México

    Colaboração contínua
    5

    Excellent work. I handed over a partially routed 4-layer board with mixed-signal, RF and mains-switching sections, and Abdul finished it properly. What stood out was that he audited what he inherited instead of just completing the airwires: he found traces contaminating the ground plane layer, a rail...

    US$ 100-US$ 200

    $

    8 dias

    Tempo

    gig

    Circuito Impresso (PCB)

    Útil?
    Sim
    Não
    A

    armando_sep

    MX

    México

    Colaboração contínua
    5

    Careful, precise work on a small change order. Two footprint-level changes, an inductor swap to a different land pattern and paste aperture correction on a 20-pad LGA module, and he got the details right that matter: corrected my own spacing figure rather than building to a wrong number, found that the...

    US$ 50-US$ 100

    $

    6 dias

    Tempo

    gig

    Circuito Impresso (PCB)

    Imagem de amostra
    Útil?
    Sim
    Não
    A

    armando_sep

    MX

    México

    Colaboração contínua
    5

    This second order covered work Abdul himself identified as necessary: pouring the ground plane that turned out not to exist, rehoming power through-routes out of the high-voltage creepage band across all four layers, and replacing auto-fill with explicit polygons so clearances became measurable rather...

    US$ 50-US$ 100

    $

    6 dias

    Tempo

    gig

    Circuito Impresso (PCB)

    Útil?
    Sim
    Não